ACU-RITE SENC 150 Manual de referencia - Página 11

Navegue en línea o descargue pdf Manual de referencia para Media Converter ACU-RITE SENC 150. ACU-RITE SENC 150 20 páginas. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
También para ACU-RITE SENC 150: Manual de instalación (8 páginas), Manual de instalación (4 páginas), Manual de instalación (6 páginas), Manual de instrucciones (12 páginas)

Imprimir página
SENC 150
A variety of mounting conditions can be accomodated.
 The machine configuration determines the brackets required
to mount the linear encoder.
 Two typical mounting conditions are shown: flush and offset.
 All fasteners shown on this page are supplied with the encoder
hardware.
Flush surfaces
1
2
1
M6 x 25 mm BHCS
(1/4"-20 x 1" BHCS)
M6 flat washer
 Mounting surfaces are flush within 0.25 mm (0.010").
 The reading head leveling screws are not required.
2
3
2
M4 x 25 mm SHCS low head
(8-32 x 5/8" SHCS low head)
(8-32 x 3/4" SHCS low head)

5 Mounting the encoder without backup spar

Offset surfaces
1
2
2
3
M4 hex nut
 Mounting surfaces are offset.
 Mounting without backup spar.
 Use leveling screws in place of spacers or shims.
2
Space of ≤4.5 mm (≤0.18") use
reading head leveling screws!
2
3
11