Digitrax DH166P Manual - Página 6

Navegue en línea o descargue pdf Manual para Media Converter Digitrax DH166P. Digitrax DH166P 8 páginas.

Digitrax Transponding CV61

Digitrax Transponding is controlled by CV61. The initial factory set value is 000

for OFF. To turn on transponding, program CV61 to a value of 002. This al-

lows you to use Digitrax transponding to keep track of your rolling stock. When

transponding is enabled, the front light of the locomotive will flicker slightly to

indicate transponding signal is being communicated. For optimal transponding

operation, we recommend that you hook up the forward and rear lights as shown

above.

Function Outputs on the DH166P

The DH166P is set up at the factory to control six function outputs. The

DH166P is configured to control the lights on the factory light board through the

DCC medium plug using Function 0 (FOF-forward and FOR-reverse) for direc-

tional lighting. Functions F1(Green) and F2 (Violet) are part of the harness for

easy hookup.

F3 and F4 are also available on the decoder board. These can be accessed by snip-

ping the shrink wrap and peeling it back to expose the solder pads that control

these functions (Figure 5). To use these functions, solder a wire from the pad

for the function you wish to use to the lamp (or other function) you wish to con-

trol. The Blue/+Common pad works the same way as the blue wire on the harness

and is provided here for convenience. The wire colors indicated are the standard

color code used in the industry (you can use any color you like). These colors are

important if you plan to use function remapping.

CAUTION: When adding function wires, be very careful that the wires you

add do not come into contact with any other pads or components on the board

where they might create a short circuit.

All six function outputs can be easily set up with Digitrax FX

or as standard on/off functions with the following operational qualifiers:

Forward or Reverse direction of travel, or

Whether F0 is on or off, or

Both direction of travel and whether F0 is on or off, or

Whether the locomotive is stopped or moving.

— 6 —

lighting effects