Cisco Physical Access 1125 Appliance Manual del usuario - Página 30
Navegue en línea o descargue pdf Manual del usuario para Hardware de red Cisco Physical Access 1125 Appliance. Cisco Physical Access 1125 Appliance 42 páginas.
Imprimir página
Rack Mounting the Cisco PAM 1125 Appliance
Figure 3-10
2
The following items are called out in
1
2
Installing the Chassis in the Rack
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an appropriate lifting
Caution
device. A fully loaded Cisco PAM appliance weighs approximately 14 kg (31 lbs.).
Locate one person at the front of the rack and one at the rear.
Step 1
Position the chassis so that the L brackets (see item 1 in
Step 2
chassis mounting brackets (see item 2 in
While one person supports the weight of the chassis from the rear, the other person must adjust the L
Step 3
brackets to fit tightly into the chassis brackets (see item 3 in
Cisco Physical Access 1125 Appliance User Guide
3-12
Attaching an L Bracket to a Center Post
1
L bracket
Rack screw
Chapter 3
3
Figure
3-10:
3
Front side of right center post
Figure 3-11 on page
Figure 3-11 on page
3-13).
Figure 3-11 on page
Rack Mounting the Cisco PAM 1125 Appliance
3-13) are inserted into the
3-13).
OL-20929-01