Cisco Physical Access 1125 Appliance Manual del usuario - Página 39
Navegue en línea o descargue pdf Manual del usuario para Hardware de red Cisco Physical Access 1125 Appliance. Cisco Physical Access 1125 Appliance 42 páginas.
Imprimir página
Hardware Specifications
Table A-1
Table A-1
Dimensions
Weight
Temperature
Humidity
Shock
Acoustic noise
Electrostatic discharge
(ESD)
Maximum power
consumption
Power input (low
range)
Power input (high
range)
CPU
Memory
Hard drive
Ethernet
OL-20929-01
describes the specifications for the Cisco PAM 1125 appliance.
Environmental Specifications
1.7 in. high (4.3 cm)
•
17 in. wide (43.2 cm)
•
20 in. deep (50.8 cm)
•
15.0 lb (6.8 kg), base chassis
•
Non-operating—-40 ° to 70 °C / -40 ° to 158 °F
•
Operating—10 ° to 35 °C / 50 ° to 95 °F, with the maximum rate
of change not to exceed
10 ° C / 50 °F per hour
•
Non-operating—-90% relative humidity, non-condensing at 35
°C / 95 °F.
•
Operating—2.0 g, 11 msec, 1/2 sine
•
Packaged—Operational after an 24-inch free fall
7 Bels in sound power for a typical office ambient temperature
(18-24 °C/65-75 °F). Your selection of peripherals may change the
noise level.
Tested to 15 kilovolts (kV); no component damage.
350W (maximum output, power supply rating)
540W (maximum input, power supply rating)
90 to 127 (nominal) VAC; 47–63Hz
180 to 264 (nominal) VAC; 47–63Hz
Intel Core2 Duo 2.13-GHz processor with a 1066-MHz front side bus
(FSB) and 2 MB of Level 2 cache
4 GB PC2-5300 DDR2 SDRAM ECC
250 GB SATA 7200 RPM
2 X 10/100/1000 RJ-45, 10BASE-T, 100BASE-TX, 1000BASE-T
A P P E N D I X
Cisco Physical Access 1125 Appliance User Guide
A
A-1