Cisco RSP4+ Manual de instalación y configuración - Página 12

Navegue en línea o descargue pdf Manual de instalación y configuración para Hardware de red Cisco RSP4+. Cisco RSP4+ 20 páginas. Bootflash memory upgrade to 16mb

Imprimir página
Removing the SIMM
Figure 3
Locate the SIMM. The SIMM occupies socket U1. (See Figure 3.)
Step 2
Remove the SIMM from its socket by pulling the locking spring clips on both sides outward and tilting
Step 3
the SIMM free of the clips. (See Figure 4.) Be careful not to break the clips on the SIMM connector.
Figure 4
Step 4
Grasp the ends of the SIMM with your thumbs and forefingers and lift it out of the socket. (See
Figure 5.)
RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide
12
Location of SIMM on the RSP4+
1
9
U7
8
7
Releasing the SIMM Spring Clips
Faceplate edge of
the system card
2
U15
U12
R O
U T
E S
W I
T C
H P
R O
C E
S S
O R
1 6
6
5
Pull the tabs away with
your thumbs, bracing
your forefingers against
the posts. Raise the SIMM
to a vertical position.
Polarization notch
SIMM
3
4
78-12288-02