Cisco TelePresence Server 7010 Manual de instrucciones de sustitución - Página 20

Navegue en línea o descargue pdf Manual de instrucciones de sustitución para Hardware de red Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 23 páginas. 600w ac-input power supply and fan tray replacement
También para Cisco TelePresence Server 7010: Manual de instrucciones de instalación (15 páginas), Manual de instalación (14 páginas), Primeros pasos (16 páginas), Manual de instrucciones de sustitución (18 páginas)

Replacing the Chassis

show Command Descriptions and Examples

This section describes the various show commands that you can use to display system status and

conﬁguration. If you installed the interface processors in the same slot locations that they occupied

in the old chassis, the interfaces should retain the same conﬁguration. If you installed the interface

processors in different slot locations, the system will recognize the interfaces, but you will have to

use the conﬁgure command to reconﬁgure and enable them.

The show version command displays the current hardware conﬁguration of the router, including the

system software version that is currently loaded and running. The show controllers cxbus command

lists all CxBus interfaces and includes the currently loaded and running microcode version for each.

You can check the version of the default ROM image either by removing the board and checking the

ROM labels or by conﬁguring the interface or system software to boot from ROM, restarting the

system, and using these same commands to check the running version.

Use the show version command to display the current system software version, and use the show

controllers cxbus command to display the microcode version of the SP and each interface

processor. In the following example of the show version command, the running system software is

Release 10.3(1)).

Following is an example of the show controller cxbus command display. (In this example, ROM

Version 1.0 is assumed because you cannot determine the ROM version with screen displays unless

it is the running version.)

20 Cisco 7010 and Cisco 7505 Chassis Replacement Instructions

Router> show version

GS Software (GS7), Version 10.3(3), SOFTWARE

Compiled Wed 10-May-95 14:46 by mpo

System Bootstrap, Version 4.6(1) [fc2], SOFTWARE

Current date and time is Sat 1-22-1994 21:38:35

Boot date and time is Tue 12-28-1993 15:32:28

Router uptime is 3 weeks, 4 days, 6 hours, 7 minutes

System restarted by reload

System image file is "gs7-k.103-1", booted via tftp from 1.1.1.12

(example text omitted

X.25 software, Version 2.0, NET2 and BFE compliant.

Bridging software.

1 EIP controller (6 Ethernet).

1 TRIP controller (4 Token Ring).

6 Ethernet/IEEE 802.3 interfaces.

4 Token Ring/IEEE 802.5 interfaces.

(remainder of example text omitted)

Router# show controllers cxbus

(text omitted from example)

FSIP 1, hardware version 1.0, microcode version 1.0

Interface 8 - Serial1/0, electrical interface is V.35 DTE

(text omitted from example)

Interface 9 - Serial1/1, electrical interface is V.35 DTE

(remainder of displayed text omitted from example)