Cisco UCS 5108 Hoja de especificaciones - Página 42

Navegue en línea o descargue pdf Hoja de especificaciones para Hardware de red Cisco UCS 5108. Cisco UCS 5108 50 páginas. Fnic tunables feature
También para Cisco UCS 5108: Manual (8 páginas)

Imprimir página

SUPPLEMENTAL MATERIAL

Optical SFP+ Transceivers

If distances greater than 5 meters (16.4 feet) must be spanned, the Fabric Extender supports the

substitution of the copper SFP+ by optical SFP+ transceivers. The SFP+ 10-Gb Ethernet optical transceiver is

a bidirectional device with a transmitter and receiver in the same physical package, as shown in

It has a duplex LC connector on the optical interface. A fiber optic cable must be used to connect the two

transceivers together.

Figure 26

SFP+ Optical Transceiver

Table 21 SFP+ Callouts

Callout

Fabric Extender Bundles

You can order two kinds of Fabric Extender bundles:

UCS-IOM2208-16FET. This bundle includes one 2208XP Fabric Extender plus 16 Fabric Extender

■

Transceivers (FETs). 8 FETs are used for the Fabric Extender and 8 for the Fabric Interconnect.

UCS-IOM2204-8FET. This bundle includes one 2204XP Fabric Extender plus 8 Fabric Extender

■

Transceivers (FETs). 4 FETs are used for the Fabric Extender and 4 for the Fabric Interconnect.

The FETs are in an SFP+ form-factor and support 10 Gbps full-duplex transmissions between the Fabric

Extender and Fabric Interconnect, using your own multimode fiber (MMF) optical cables. The reach is 25

meters using OM2 MMF optical cables and 100 meters using OM3 MMF optical cables.

If you do not order the bundle that includes the transceivers, you can order the transceivers separately as

spares (PID = FET-10G=).

Description

Dust plug

Bail clasp with clasp tab

Transmit bore

Receive bore

Figure

Cisco UCS 5108 Blade Server Chassis

26.