Cisco Firepower Management Center 1500 Manual de introducción - Página 35
Navegue en línea o descargue pdf Manual de introducción para Servidor Cisco Firepower Management Center 1500. Cisco Firepower Management Center 1500 42 páginas. Firepower management center
Imprimir página
2.
When prompted, confirm that you want to save the configuration.
3.
When prompted, enter a name for the configuration.
What to Do Next
To use the configuration you just saved to restore the appliance, continue with
Update Files and Mounting the Image, page
To load a saved restore configuration:
1.
From the restore utility main menu, select
The utility presents a list of saved restore configurations. The first option,
last used to restore the appliance. The other options are restore configurations that you have saved.
2.
Select the configuration you want to use.
The utility displays the settings in the configuration you are loading.
3.
When prompted, confirm that you want to load the configuration.
The configuration is loaded. If prompted, confirm the IP address assigned to the appliance's management
interface.
What to Do Next
To use the configuration you just loaded to restore the appliance, continue with
Update Files and Mounting the Image, page
Next Steps
Restoring your appliance to factory default settings results in the loss of almost all configuration and event data
on the appliance. Note that deleting license and network settings also resets LOM settings in some cases.
Retention of LOM settings after the restore process varies by model and Firepower version:
If you are restoring an FMC model 750, 1500, or 3500 to factory defaults, deleting the license and network
settings also resets the LOM settings.
Caution:
When restoring FMC models 750, 1500, or 3500 to factory settings using LOM, if you do not have
physical access to the appliance and you delete the license and network settings, you will be unable to
access the FMC after the restore.
If you are restoring an FMC model 2000 or 4000 to factory defaults:
—
If you restore the appliance to Version 6.2.3 or earlier, the system does not reset LOM settings regardless
of whether you choose to delete the license and network settings.
—
If you restore the appliance to Version 6.3+, the system resets LOM settings regardless of whether you
choose to delete the license and network settings.
Caution:
When restoring FMC models 2000 or 4000 to Version 6.3+ using LOM, if you do not have physical
access to the appliance and you delete the license and network settings, you will be unable to access the
FMC after the restore.
After you restore an appliance, you must complete an initial setup process:
If you did not delete the appliance's license and network settings, you can use a computer on your
management network to browse directly to the appliance's web interface to perform the setup. For more
information:
—
For Versions 5.4.x - 6.4.x, see
Cisco Firepower Management Center Getting Started Guide
Restoring a Firepower Management Center to Factory Defaults
32.
7 Load Configuration
32.
Initial Setup Page: Management Centers, page
Downloading the ISO and
.
default_config
Downloading the ISO and
13.
, is the configuration you
35