Cisco ISDN GW 3241 Primeros pasos - Página 11

Navegue en línea o descargue pdf Primeros pasos para Pasarela Cisco ISDN GW 3241. Cisco ISDN GW 3241 17 páginas. High performance video gateway which enables isdn network connectivity for cisco telepresence ip
También para Cisco ISDN GW 3241: Manual del usuario (15 páginas)

Imprimir página

Configuring the ISDN gateway

Step one: Log in to the ISDN gateway

All administration of the ISDN gateway is performed via the web interface.
To log in to the ISDN gateway:
1
Use your browser to navigate to the IP address of the ISDN gateway (to discover
the IP address, refer to the previous section).
2
Click
Log in
information page
Cisco recommends that you change the admin account to use a password
i
as soon as possible. To do that, click
information
required user information.

Step two: Allocate port licences

Port licenses must be allocated to the ISDN gateway from the Supervisor's
page. Refer to the online help for assistance.
licenses

Step three: Set up the ISDN interfaces

1
In the web interface, go to
2
Select the
ISDN interface type
used in the UK and mainland Europe, T1 (USA and Canada) in North America,
and T1 (Japan) in Japan.
3
Complete the other settings as required by your network, referring to the online
help for further information.
4
Click
Apply changes
5
Restart the ISDN gateway (this is only necessary if you changed the ISDN
configuration). To do this:
i
Go to
Settings > Shutdown
ii
Confirm that you want to shut down the ISDN gateway.
iii Click
Restart ISDN GW
6
When the ISDN gateway has restarted, log in to the web interface again, and go
to
Settings > ISDN ports
and enter the user name
is displayed.
page or go to
Settings > ISDN
to save any changes you have made to the configuration.
.
.
with no password. The
admin
Change password
, click the
Users
.
to match that of your installation; E1 is typically
, and click
Shut down ISDN GW
Configuring the ISDN gateway
on the
link, and provide the
admin
.
Login
Login
Port
11