Epson Series Perfection 1240U Series Manual de inicio - Página 8

If you use an extension cord with the scanner, make sure the

total ampere rating of the devices plugged into the extension

cord does not exceed the cord's ampere rating. Also, make

sure the total ampere rating of all devices plugged into the

electrical outlet does not exceed the electrical outlet's ampere

rating.

Except as specifically explained in the scanners guides, do not

attempt to service the scanner and the power cord yourself.

Never disassemble, modify, or attempt to repair the AC

adapter.

Unplug the scanner and refer servicing to qualified service

personnel under the following conditions:

If the power cord or plug is damaged;

If liquid has entered the scanner;

If the scanner has been dropped or the case damaged;

If the scanner does not operate normally or exhibits a

distinct change in performance. (Do not adjust controls

that are not covered by the operating instructions.)

If you plan to use the scanner in Germany, observe the

following:

To provide adequate short-circuit protection and over-

current protection for this scanner, the building installation

must be protected by a 10 or 16 amp circuit breaker.

Note for German-speaking users:

Bei Anschluss des Scanner an die Stromversorgung muss

sichergestellt werden, dass die Gebäudeinstallation mit einer

10 A- oder 16 A-Sicherung abgesichert ist.

If you are not going to use the scanner, be sure to unplug the

AC adapter from the electrical outlet.

Safety Instructions