Epson Series Perfection 1240U Series Manual de inicio - Página 9

Beware of electrical shock hazards.

Do not insert objects into any openings as they may touch

dangerous voltage points or short out parts.

Never disassemble or attempt to repair the scanner and the

option.

Do not expose to water or excess humidity.

Do not place multiple loads on the electrical outlet.

Be sure your AC power cord meets the relevant local safety

standards.

Never insert or disconnect the power plug with wet hands.

Power-supply cords should be protected from abrasion, cuts,

crimping and kinking. Be sure to place your cords to avoid

any damage. Do not place objects on top of the power cord

and the AC adapter or allow the power cord to be stepped on

or run over. You should take special care to try to keep the

power cord straight at the ends and the points where it enters

and leaves the transformer.

Keep out of reach of children.

For US and Canadian users

Use the included power cord or a 6 to 10 feet long UL-

approved type NISPT-2, 2 x 18 AWG cord with a 125 V 10 A

polarized plug and 125 V 7 A connector.

The AC Adapter is equipped with a polarized alternating-

current line plug (a plug having one blade wider than the

other) and polarized power inlet. These plugs only fit into a

power outlet and your equipment in one way. This is a safety

feature. If you are unable to insert the plug properly, try

reversing the plug. If the plug still fails to fit, contact an

electrician to replace your outlet. Be sure to use only the

polarized AC cord that comes with the scanner.

Safety Instructions