Acuity Brands Lighting MA Manual - Página 11
Navegue en línea o descargue pdf Manual para Luz exterior Acuity Brands Lighting MA. Acuity Brands Lighting MA 18 páginas.
Imprimir páginaInstallation Instructions
RSX LED
6.
Aim fixture as required and tighten the 7/16-14 SHC knuckle adjustment bolt using an approximately
38 ft-lbs. (See figure 14) For units with photocontrol receptacle, the fixture mounting/aiming angle must be
restricted from 0° to 45° from horizontal per ANSI C136.10-2010.
7.
Energize the luminaire to verify its operation and proper illumination of area.
WARNING: DO NOT MOUNT THE KNUCKLE FITTER TO A TENON OR BRACKET THAT IS MORE
THAN 5 DEGREES FROM VERTICAL. MOUNTING AT AN ANGLE GREATER THAN 5 DEGREES RE-
QUIRES USE OF A PROPERLY TIGHTENED THRU-BOLT AND LOCKNUT. FAILURE TO CORRECTLY
INSTALL COULD RESULT IN SERIOUS INJURY OR DEATH.
©2016 Acuity Brands Lighting, Inc.
All Rights Reserved.
Figure 14
Lithonia Lighting Outdoor
One Lithonia Way, Conyers, GA 30012
Phone: 800-279-8041 Fax: 770-918-1209
www.lithonia.com
Part Number: IM-459 Rev A
Revision Date: 8/29/19
Page #9