Epson PLQ-20 Manual de instalación - Página 14

Navegue en línea o descargue pdf Manual de instalación para Accesorios para impresoras Epson PLQ-20. Epson PLQ-20 20 páginas. 24-pin dot matrix printers
También para Epson PLQ-20: Especificaciones (2 páginas), Especificaciones (2 páginas), Especificaciones (2 páginas)

Imprimir página

When setting up the printer

Caution:

Be sure the AC power cord meets the relevant local safety

standards.

Do not place the printer on an unstable surface or near a

radiator or heat source.

Place the printer on a flat surface. The printer will not operate

properly if it is tilted or placed at an angle.

Do not place this product on a soft, unstable surface like a bed

or a sofa, or a small, enclosed area, as this restricts ventilation.

Do not block or cover the slots and openings in the printer's

cabinet, and do not insert objects through the slots.

Use only the type of power source indicated on the printer's

label. If you are not sure of the power supply specifications in

your area, contact your local power company or consult your

dealer.

Connect all equipment to properly grounded electrical

outlets. Avoid using outlets on the same circuit as

photocopiers or air control systems that regularly switch on

and off.

Do not use a damaged or frayed power cord.

The power cord should be placed to avoid abrasions, cuts,

fraying, crimping, kinking, and other damage.

If you use an extension cord with the printer, make sure the

total ampere rating of all devices plugged into the extension

cord does not exceed the cord's ampere rating. Also, make

sure the total ampere of all devices plugged into the electrical

outlet does not exceed the electrical outlet's ampere rating.

Safety Instructions