ARGtek CPE 2618 Manual de instalación rápida - Página 3

Navegue en línea o descargue pdf Manual de instalación rápida para Enrutador de red ARGtek CPE 2618. ARGtek CPE 2618 13 páginas. Wlan outdoor cpe for 5ghz & dual band

Imprimir página

C. PoE connection

1. Connect (POE) RJ45 Jack to CPE RJ45 Jack with good quality Ethernet cable.

2. Connect (LAN) Jack to PC or Switch Hub LAN port.

3. Plug the AC power cordially

D. CPE Connection

1. Open the CPE enclosure you will find two RJ45 Jacks two LEDs and one reset button.

2. Connect the PoE cable to either LAN or WAN port.

3. To reset the CPE just press and hold the reset button for about 10 seconds and wait for

55 seconds to reboot the CPE.

Notice:

This CPE default operation mode is in Bridge mode. Both LAN and WAN ports are in the

same switch hub. Please go to the webpage and change the operation mode to Gateway

mode when you are going to use the WAN port for your CPE.

ARGtek Communication Inc.

E-Mail:[email protected] Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742