Motorola im240 - Wireless PC Card Modem Manual del usuario - Página 18

Navegue en línea o descargue pdf Manual del usuario para Módem Motorola im240 - Wireless PC Card Modem. Motorola im240 - Wireless PC Card Modem 43 páginas. Motorola wireless modem user's guide

Imprimir página

Modem Setup

Installing the modem driver

1 In the Control Panel, double click the Modems icon. If the Install

New Modem wizard opens, skip to step 3. Otherwise, proceed to

step 2.

2 Click the Add button to open the Install New Modem wizard.

3 Select Don't detect my modem, I will select it from a list and click

Next.

4 Select the Have Disk button.

5 Enter d:\Drivers\WinNT\ where d is the drive letter for your

CD-ROM drive and click OK.

6 On completion of this step, the modem driver is installed and you

can proceed to configure the im240 Wireless Modem to use your

account (if it was not preactivated).

7 Verify that im240 Wireless Modem is displayed and click Next.

8 Select the port that you installed in the previous step. Click Next.

9 Click Finish.

Setting up Remote Access Service (RAS)

1 The Network control panel opens. In the Network window, select the

Services tab. Within the Services tab, select Remote Access

Service. Click Properties

2 The Remote Access Setup window opens. Click Add.

3 The Add RAS Device window opens. Ensure the COM port for your

im240 Wireless Modem is selected from the drop-down list. Then

click OK.

4 The Remote Access Setup window now shows the added COM

port. Verify that the im240 Wireless Modem was added to the list of

RAS devices, verify that TCP/IP is the only dial out network protocol

by clicking Network and then Protocols. Then click Continue.

5 In the Network Services Selection window, click Close.

6 The Network Settings Change window opens prompting you to

restart your laptop. Click Yes to restart.

7 The im240 Wireless Modem is now installed.

Note: Dial up networking must be installed on the Computer for

Dashboard to install properly. Follow the steps for "Installing

the modem driver" before using the Dashboard.