Toshiba 14AF41C Manual de servicio - Página 12

Navegue en línea o descargue pdf Manual de servicio para TV Toshiba 14AF41C. Toshiba 14AF41C 36 páginas. Color television

Imprimir página
Toshiba 14AF41C Manual de servicio
2-16: SEPARATION 1, 2
1.
Receive the stereo signal (L=2KHz, R=400Hz).
2.
Connect the AC voltmeter to AUDIO OUT JACK though
stereo filter (L=400Hz, R=2KHz).
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (31) on the remote control to
select "SEP1".
4.
Press the VOL. UP/DOWN button on the remote control
until the output of L-CH and R-CH become minimum.
5.
Press the CH UP button once the set to "SEP2" mode.
6.
Press the VOL. UP/DOWN button on the remote control
until the output of L-CH and R-CH become minimum.
7.
Press the CH DOWN button once the set to "SEP1"
mode.
8.
Repeat step 4 to step 7 several times.
The output difference of the between with Filter and
without Filter should be more than 25db for both L and R.
2-17: BRIGHTNESS
1.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (16) on the remote control to
select "BRI".
2.
Press the VOL. UP/DOWN button on the remote control
until the brightness step No. becomes "68"
3.
Press the TV/VIDEO button on the remote control to set
to the AV mode. Then perform the above adjustments
1~2.
4.
Press the TV/VIDEO button on the remote control to set
to the CS mode. Then perform the above adjustments
1~2.
2-18: UNI-COLOR
1.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (18) on the remote control to
select "UNI COL".
2.
Press the VOL. UP/DOWN button on the remote control
until the contrast step No. becomes "49"
3.
Press the TV/VIDEO button on the remote control to set
to the AV mode.
4.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (18) on the remote control to
select "UNI COL".
5.
Press the VOL. UP/DOWN button on the remote control
until the contrast step No. becomes "49"
6.
Press the TV/VIDEO button on the remote control to set
to the CS mode. Then perform the above adjustments
4~5.
ELECTRICAL ADJUSTMENTS
2-19: SUB TINT/SUB COLOR
1.
Receive the color bar pattern. (RF Input)
2.
Connect the oscilloscope to TP806.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (20) on the remote control to
select "TINT".
4.
Press the VOL. UP/DOWN button on the remote control
until the section "A" becomes a straight line
(Refer Fig. 2-2).
5.
Connect the oscilloscope to TP804.
6.
Press the CH DOWN button 3 times to set to
"SUBCONT" mode.
7.
Press the VOL. UP/DOWN button on the remote control
until the red color level is adjusted to 100% of the white
level. (Refer to Fig. 2-3)
8.
Receive the color bar pattern. (Audio Video Input)
9.
Press the TV/VIDEO button on the remote control to set
to the AV mode. Then perform the above adjustments
2~7.
10.
Receive the color bar pattern. (Audio Video Input)
11.
Press the TV/VIDEO button on the remote control to set
to the CS mode. Then perform the above adjustments
2~6.
12.
Press the VOL. UP/DOWN button on the remote control
until the red color level is adjusted to 100% of the white
level. (Refer to Fig. 2-3)
White 100%
"A"
Fig. 2-2
RED Level
Fig. 2-3