Toshiba 24/32 WD3C Series Manual de instrucciones - Página 20
Navegue en línea o descargue pdf Manual de instrucciones para TV Toshiba 24/32 WD3C Series. Toshiba 24/32 WD3C Series 50 páginas.
Imprimir página
Settings Menu Content
Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Picture Zoom
Picture Shift
PC Position
Autoposition
H Position
V Position
Dot Clock
Phase
Advanced Settings
Dynamic
Contrast
Colour Temp
White Point
Tru Blue
Tru Micro
Dimming
Noise Reduction
Film Mode
Skin Tone
Colour Shift
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. The backlight function ( will be located under
the Energy Saving setting) will be inactive if the Energy Saving is set to an option
other than Custom.
Sets the desired image size format.
This option (will be located under the Picture Zoom setting) may be available depending
on the Picture Zoom setting. Highlight and press OK, then use directional buttons to
shift the picture upwards or downwards.
Appears only when the input source is set to VGA/PC.
If the image is not centered in VGA mode use this option to automatically adjust the
position of the image. Press OK to start the auto adjustment.
This item shifts the image horizontally to the right hand side or left hand side of the screen.
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the input source (computer, etc.) you may see a hazy or noisy picture on
the screen. You can use phase to get a clearer picture by trial and error.
You can change the dynamic contrast ratio to desired value.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
If the Colour Temp option is set as Custom, this setting will be available (will be located
under the Colour Temp setting). Increase the 'warmth' or 'coolness' of the picture by
pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
Low, Medium, High and Off options are available. While Tru Micro Dimming is active,
it will enhance contrast locally for each defined zone.
Low, Medium, High and Off options are available. If the signal is weak and the picture
is noisy, use the Noise Reduction setting to reduce the amount of noise.
Films are recorded at a different number of frames per second to normal television programmes.
Turn this feature to Auto when you are watching films to see the fast motion scenes clearly.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
English - 19 -
(**) Limited Models Only