Toshiba HD-A35KC Manual del usuario - Página 23

Navegue en línea o descargue pdf Manual del usuario para Reproductor de DVD Toshiba HD-A35KC. Toshiba HD-A35KC 46 páginas. Toshiba owner's manual hd dvd player hd-a35ku, hd-a35kc

Imprimir página

When you connected an audio system to the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack

( page 16):

Press

to select "Speaker Setting", then press OK.

Press RETURN or

HD-A30KUKC_en.indd 23

Select one of the followings according to your connection, and press OK.

5.1ch

When a 5.1 channel surround system is connected to this player.

1 Set the speaker sizes, distance to each speaker and the crossover frequency.

Front Left / Front Right

Small: Select if the speaker cannot output low frequency.

Large: Select if the speaker can output low frequency.

Center / L Surround / R Surround

Small: Select if the speaker cannot output low frequency.

Large: Select if the speaker can output low frequency.

None: When the speaker is not connected.

Subwoofer

Use:

When a subwoofer is connected.

Don't Use: When a subwoofer is not connected.

Crossover Setting

Low frequency under this frequency (80Hz / 100Hz / 120Hz) will be

output to a connected subwoofer.

Select a distance to each speaker from the listening position.

2 Select "Next", then press OK.

To cancel to return to the previous screen, select "Clear", then press OK.

To save your selection and ﬁ nish the setting, select "Clear", then press OK.

3 Select "Automatic Test Tone", then press OK.

A test signal is set to each speaker.

4 Adjust each of the volumes by

speakers by

so that each speaker can sound at

the same volume.

For further adjustment, check the channel balance on

the ampliﬁ er.

5 When complete, select "OK", then press OK.

Note

• This setting is effective only when "Digital Out SPDIF" (

page 22) is set to "PCM".

2ch

When a 2ch stereo system is connected to this player.

to return to the menu of step 1.

, selecting

07.7.26 3:01:07 PM