Pioneer A-300R Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer A-300R. Pioneer A-300R 13 páginas.

Imprimir página

PANEL FACILITIES

(FRONT PANEL)

@ POWER switch/indicator

Press to turn power to the unit ON and OFF.

The indicator lights when the power is ON and goes off when

the power is OFF.

@ Remote control sensor window

@ TAPE 2 MONITOR switch/indicator

Use when there is an adaptor component (graphic equalizer,

etc.) or cassette deck connected to the TAPE 2/MONITOR

{ADPT) terminals.

Off:

Indicator goes out when not in use.

On:

Indicator lights when using the adaptor component or listen-

ing to the cassette deck.

NOTE:

® When no connections are made to the TAPE 2/MONITOR

(ADPT) terminals, or when they are not in use, be sure to

set this switch to the off position. {No sound will be heard

if itis set to the on position.)

® To monitor during recording using a 3-head deck, use the

TAPE 2/MONITOR (ADPT) terminal. Even if the 3-head deck

is connected to the TAPE 1/DAT terminal, monitoring dur-

ing recording cannot be performed. (See page 8.)

@ INPUT SELECTOR switch

Use to select the playback source.

TAPE 1/DAT:

For playback with a cassette deck or digital audio tape deck

connected to the TAPE 1/DAT terminals.

TUNER:

For AM or FM broadcast reception with a tuner.

cD:

For compact disc playback with a CD player.

LINE:

Set to this position when listening to a program from a com-

ponent connected to the LINE terminals

PHONO:

For record playback with a turntable.

® BALANCE control

Should normally be left in the center position. Adjust the bal-

ance if the sound is louder from one of the speakers. If the

right side is louder, turn toward the L (left) position and if the

left side is fouder, turn toward the R (right) position.

Use to adjust the volume level.

@ PHONES jack

When using headphones, insert the plug into this jack.