Whirlpool Slide-Out Range Hood Manual de instalación y uso - Página 12

Navegue en línea o descargue pdf Manual de instalación y uso para Campana de ventilación Whirlpool Slide-Out Range Hood. Whirlpool Slide-Out Range Hood 36 páginas. 30" (76.2 cm) and 36" (91.4 cm) slide-out range hood

Imprimir página

Front trim kits for matching the front panel to your range or

cooktop color are available from your dealer.

For ordering information see the "Assistance or Service" section.

For 30" (76.2 cm) model series

KWVU205:

Part No. 4360201 (white)

Part No. 4360203 (black)

Part No. 4392855 (biscuit)

For 36" (91.4 cm) model series

KWVU265:

Part No. 4360202 (white)

Part No. 4360204 (black)

Part No. 4392856 (biscuit)

For 30" (76.2 cm) model series

GZ7730:

Part No. 4396067 (white)

Part No. 4396066 (black)

Part No. 8171368 (biscuit)

IH5302:

Part No. 4396844 (white)

For 36" (91.4 cm) model series

GZ7736:

Part No. 4396069 (white)

Part No. 4396068 (black)

Part No. 8171369 (biscuit)

The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the range hood

before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.

A. Light button

B. Speed buttons

Operating the Fan

1. Slide the range hood screen forward.

2. Press the speed buttons for the desired speed.

Speed may be increased, decreased, or turned off at anytime

during the range hood operation. The indicator light next to

the speed button selected should be on when the fan is

running.

3. Press the 0 button or close the screen to shut off the fan.

The fan will shut off when the screen is about 2" (5.1 cm) from

the closed position. When the screen is opened the fan will

operate at the last setting.

Optional Front Trim Kits

RANGE HOOD USE

KWVU Model Series

Install Front Trim Kit

1. Pull out on the range hood screen for easier access to the

screws.

2. Remove the 3 mounting screws directly behind the front

panel, and remove the front panel from the range hood

screen.

A. Three mounting screws

3. Remove existing trim piece and insert new trim piece.

4. Reattach front panel using the 3 mounting screws.

5. Push the range hood screen back in.

Operating the Light

1. Open the range hood screen about 1" (2.5 cm).

2. Press the light button.

The light will be on each time the screen is opened. The light

can be used for a night light by opening the screen about

1" (2.5 cm).

3. Press the light button to turn off the light.

Another option for turning off the range hood light is to close

the screen.