Xerox 6180DN - Phaser Color Laser Printer Manual - Página 29

Navegue en línea o descargue pdf Manual para Impresora Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 34 páginas. 26-ppm monochrome/ 20-ppm color
También para Xerox 6180DN - Phaser Color Laser Printer: Manual de instalación (34 páginas), Hoja de especificaciones (2 páginas), Manual del usuario (32 páginas), Manual del usuario (28 páginas), Manual de instalación (2 páginas), Manual de seguridad (38 páginas), Nota de publicación (2 páginas), Manual de instalación (2 páginas), Manual de introducción (37 páginas), Manual (34 páginas), Manual de introducción (34 páginas), Manual del usuario (32 páginas), Manual de instalación y funcionamiento (8 páginas), Especificaciones (4 páginas), Manual (28 páginas)

New Features And Updates For EPS Products Only

DocuSP 4.1 to 4.2 Differences Document

DocuSP 4.2 enables users to select and print single or

multiple LCDS reports from the DocuSP Tape Client

GUI. If multiple reports are desired, the reports must be

specified in ascending order with a position relative to

the beginning of the container.

The user can specify a range of reports from a file for

printing. The report range applies to the first file in the

file range only, and uses the same format as the file

range. The maximum length for the report range is set

to 120 characters.

The Tape Client GUI is modified to support Reporting.

The File Ranges panel is renamed to Tape File

Selections. Within this panel, a new radio button for

Reports and a text field for Report Ranges are added.

GUI behaviors

♦ Selecting All: the Tape Client GUI prints all files on

the tape as in DocuSP 4.1.

♦ Selecting Range: the Tape Client GUI prints a

range of files on the tape as in DocuSP 4.1.

♦ Selecting Reports: The Tape Client GUI prints

reports from the first file specified in the Files text

field. If there is more than one entry in the Range

field, the subsequent entries are ignored.

DocuSP 4.2 introduces an update to the LCDS

accounting page. Prior to 4.2, only the initial JDL/JDE

was printed on the LCDS accounting page and saved

in the DocuSP accounting log. In 4.2, the Initial

JDL/JDE remains the same; however, the Current (or

Last) JDL/JDE is also printed on the LCDS accounting

page and saved in the DocuSP accounting log.