Xerox 6180N - Phaser Color Laser Printer Manual de introducción - Página 27

Navegue en línea o descargue pdf Manual de introducción para Impresora Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 34 páginas. Color laser printer
También para Xerox 6180N - Phaser Color Laser Printer: Manual de instalación (34 páginas), Hoja de especificaciones (2 páginas), Manual del usuario (32 páginas), Manual del usuario (28 páginas), Manual de instalación (2 páginas), Manual de seguridad (38 páginas), Nota de publicación (2 páginas), Manual de instalación (2 páginas), Manual de introducción (37 páginas), Manual (34 páginas), Manual (34 páginas), Manual del usuario (32 páginas), Manual de instalación y funcionamiento (8 páginas), Manual del evaluador (16 páginas), Especificaciones (4 páginas)

Xerox 6180N - Phaser Color Laser Printer Manual de introducción

Ability to Bind 128 Pages

Set Retain PDL

23

4. Tools and Utilities

This chapter includes the various software tools and utilities used
with the DocuSP software.
A UNIX command line utility included allowing the ability to bind
more than 125 sheets of paper for the DocuTech 61xx printers
only.
Changing the Binding Limit
Perform the following steps to modify the number of pages that can
be bound from 125 to 128.
1. In the background, right-click to open the menu. Open a
terminal window.
2. Login as root user.
3. Type: /opt/XRXnps/bin/setBind128 –f # and press
<Enter>, where # equals 1 to set the limit for bind jobs to 128
and # equals 0 to set the limit for bind jobs to 125.
4. Close the terminal window. Restart the DocuSP software.
♦ The Set Retain PDL feature on the DocuSP is limited to retain
only 50 completed jobs for future printing. Depending on the size
of retained jobs and the size of the internal hard drives; a lower
value may be more appropriate for some customers.
♦ A UNIX utility named setretainPDL has been added to the
DocuSP to allow the user to specify the number of jobs to be
retained within a range of 1 to 100.
♦ Customers who use the Set Retain PDL feature must be aware
that monitoring the disk capacity is the responsibility of the end-
user. The DocuSP does not have a process for indicating when
the disk is full. Increasing the number of retained jobs should
only be done if the customer is confident that this will not fill the
controller hard drive. Approaching disk capacity can prevent job
transmission or otherwise impact system behavior.