Alderon Industries Versa'larm 8125 Manual de funcionamiento, mantenimiento e instalación - Página 4

Navegue en línea o descargue pdf Manual de funcionamiento, mantenimiento e instalación para Sistema de seguridad Alderon Industries Versa'larm 8125. Alderon Industries Versa'larm 8125 4 páginas.

Alderon Industries Versa'larm 8125 Manual de funcionamiento, mantenimiento e instalación
Versa'larm
Part Numbers - 8124 (alarm panel only) and 8125
Manual Alarm Reset
Operation, Maintenance and Installation Manual
Testing the Alarm Panel with Pushbuttons
1. Test the alarm panel by pressing and holding the "Test" pushbutton (Fig. 15), the buzzer should annunciate and the alarm
LEDs should illuminate. Press the "Silence/Reset" pushbutton and the buzzer should silence while the alarm LEDs remain
on. Press the "Silence/Reset" pushbutton a second time so the "Auto Reset" feature reactivates the alarm panel for the next
alarm cycle. Test product weekly to ensure system integrity.
(Fig. 15)
Testing the Alarm Panel with Normally Open Switch
1. In normal condition, the alarm panel power LED (green) will be illuminated while the "Alarm Sensor" and "Alarm Reset"
LED indicators (red) will not be illuminated.
2. Activate the normally open switch connected to Terminals C and 1 on the alarm panel. The buzzer should annunciate
and the "Alarm Sensor" and "Alarm Reset" LED indicators will illuminate.
3. Deactivate the normally open switch, the buzzer should silence and the "Alarm Sensor" LED should turn off. The "Alarm
Reset" LED should remain illuminated.
4. Press the "Silence/Reset" pushbutton and the "Alarm Reset" LED should turn off and the "Auto Reset" feature reactivates
the alarm panel for the next alarm cycle.
5. Test product weekly to ensure system integrity.
Alarm Systems
Control Panels
Float Switches
Leak Detection Systems
P/N: IOM0000027
4 of 4
Alderon Industries - Hawley, MN | 218.483.3034 | [email protected] | alderonind.com