Yamaha Disklavier Mark III series DGC1B Manual de funcionamiento avanzado - Página 8
Navegue en línea o descargue pdf Manual de funcionamiento avanzado para Instrumentos musicales Yamaha Disklavier Mark III series DGC1B. Yamaha Disklavier Mark III series DGC1B 39 páginas. Dgc1b
Imprimir página
Copying the Entire
Contents of a Disk
(Disk Copy)
You can copy the entire contents of a disk to
another disk.
Note: The contents of the destination disk will be
erased.
Note: You cannot copy a disk that contains copy-
protected songs such as PianoSoft songs.
1
Specify a disk.
Note: If you are copying to a floppy disk, its
erasure protection tab must be set to
"unprotected". See "Floppy Disk
Accidental Erasure Protection" on page
18.
2
Press [FUNC.].
The FUNC. indicator lights and the
Function menu appears.
3
With the c cursor next to the Disk
option, press [ENTER].
The Disk menu appears.
4
Press [>] until the c cursor is next
to the Disk Copy option, then
press [ENTER].
A display similar to the following appears.
4
5
Use the [–/NO] and [+/YES]
buttons to select the destination
disk.
6
Press [ENTER].
Disk copy of the source disk begins.
If the destination disk is a floppy disk, the
following display appears. Eject the source
disk if the source disk is a floppy disk, then
insert a formatted destination disk.
Note1: Make sure that the destination disk is
formatted and its erasure protection tab
is set to "unprotected". See "Formatting
Disks" and "Floppy Disk Accidental
Erasure Protection" on pages 17 and
18. If the destination disk has not been
formatted in the Disklavier, the
message "UNFORMATTED DISK"
appears. In this case, cancel the song
copy process and format the disk.
Note2: If the destination disk differs from what
was specified, the message "WRONG
DESTINATION DISK. INSERT 2DD
DISK" or similar appears. Insert the
correct destination disk to continue, or
press [STOP] to cancel disk copy.
Note3: If the destination disk contains songs,
the message "DELETE SONGS ON
DEST. SURE?" appears. Press [+/YES]
if it is okay to erase the contents of the
destination disk and continue, or
[–/NO] to cancel disk copy.
Note4: When copying between the same
medium (ex. from 2HD to 2HD), the
contents are copied from track to track.
When copying between different media
(ex. from 2DD to 2HD), the contents
are copied from file to file.