aldes CW3000 Manual de inicio rápido - Página 4
Navegue en línea o descargue pdf Manual de inicio rápido para Ventilador aldes CW3000. aldes CW3000 7 páginas.
Imprimir página
This device contains high-voltage electrical components. All maintenance must
be done by a qualified technician to prevent serious injury and possible death.
Installation should be completed in conformance with local building standards and
Set-Up Sequence
Make sure the Ground Wire is securely fasten to the appropriate
socket. Such connection shall be made by a certified electrician
in accordance with the applicable electrical code.
* Unit's specific control panel may differ. For reference only.
1- Measure the voltage of the main circuit breaker and note
the values (1 to 3 steps). Such Measurement shall be made by a
certified electrician in accordance with the applicable electrical
code.
L1 – L2 : ________________________________
■
L1 – L3 : ________________________________
■
L2 – L3 : ________________________________
■
L1 – G : ________________________________
■
L2 – G : ________________________________
■
L3 – G : ________________________________
■
A maximum deviation of ± 5% is acceptable.
2- With the unit's Electrical Wiring Diagram (supplied separatly),
close the Start/stop and Occupancy
control Dry contact.
3- Close the main disconect switch,
the unit should start
WARNING, from this point on, the unit
is no longer Electrically safe.
Page 4 | ADVANCED SERIES CE and CH MODELS
DANGER
safety codes.
Device Start-Up
Verify that the motors and blowers are rotating in the proper
direction.
DANGER
This device has moving parts. All repairs
should be made by a qualified technician
in order to avoid serious injury.
RECOMMENDATION
Before turning on your new device,
inspect the condition of the ventilation
ducts. Clean the ducts before turning
on your device. If building construction
has not yet been completed, we
recommend that you wait until work
has been finished before starting up
your device. An abnormal volume of
dust in the air could clog the device
filters and cause damage to the motors.
Ensure that all diffusers are opened to their maximum
capacity before turning on your device. It is common to
notice a faint smell of burning upon the first start-up.