Yamaha A-S2100 Manual del usuario - Página 29

Navegue en línea o descargue pdf Manual del usuario para Amplificador Yamaha A-S2100. Yamaha A-S2100 33 páginas. Integrated amplifier
También para Yamaha A-S2100: Manual del usuario (42 páginas)

Imprimir página

Problem

The sound level is higher than the

The sound from the

maximum input level for the XLR

component connected

balanced input jacks.

to the BAL jack is

degraded.

The polarity is incorrect.

Bass is not spatial

when BAL (balanced

input) is selected.

The power of this unit is turned off.

The sound is

degraded when

listening with the

headphones

connected to the CD

player connected to

this unit.

Incorrect setting for the PHONO switch

The volume level is

on the front panel.

low while playing a

record.

Wrong distance or angle.

The remote control

does not work or

function properly.

Direct sunlight or lighting (from an

inverter type of fluorescent lamp, etc.) is

striking the remote control sensor of this

unit.

The batteries are weak.

Taking care of this unit

Polish finish on the side panels

Use of Yamaha Unicon cloth (sold separately) is

recommended. For heavy dirt, use Yamaha Piano

Unicon (sold separately). For puschasing, contact your

nearest authorized Yamaha dealer or service center.

Other finish

When you wipe this unit, do not use chemical solvents

(alcohol, thinner, etc.), which might damage the finish.

Use a clean, dry cloth. For heavy dirt, dampen a soft

cloth in detergent diluted with water, wring it out, and

clean this unit with the cloth.

Cause

If the output level of the connected component is

double, set the ATTENUATOR selector located

above the input jacks to ATT. (-6 dB).

Select the correct polarity with the PHASE selector.

Turn on the power of this unit.

Switch the PHONO switch to the MM or MC position

according to the type of magnetic cartridge of the

turntable.

The remote control functions within a maximum

range of 6 m (20 ft) and no more than 30 degrees off-

axis from the front panel.

Reposition this unit.

Replace all batteries.

Remedy

See

page

—