Zanussi ZSLN1211 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Lavavajillas Zanussi ZSLN1211. Zanussi ZSLN1211 21 páginas.
También para Zanussi ZSLN1211: Manual del usuario (28 páginas)

Imprimir página
Zanussi ZSLN1211 Manual del usuario
2. Wait until the indicator
and the remaining programme indicators are
off.
The indicator
shows the current setting:
•
is on = Rinse aid empty notification is
on.
•
is off = Rinse aid empty notification is
off.
3. Press the programme button to change the
setting.
4. Press the on/off button to confirm the setting.

THE RINSE AID LEVEL

It is possible to set the released quantity of rinse
aid between level 1 (minimum quantity) and level 8
(maximum quantity). Level 0 deactivates the rinse
aid dispenser and no rinse aid is released. Factory
setting: level 5.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press the programme button twice.
The indicator
starts to flash.
2. Wait until the indicator
and the remaining programme indicators are
off.
The intermittent flashing of the indicator
the current setting: e.g. 5 flashes + pause + 5
flashes = level 5.
3. Press the programme button repeatedly to
change the setting. Each pressing of the
programme button increases the level number.
After reaching the level 8, the count starts
again from the level 0. The level 0 means that
the rinse aid dispensing is disabled.
4. Press the on/off button to confirm the setting.

ACOUSTIC SIGNALS

Acoustic signals sound when a malfunction of the
appliance occurs. It is not possible to deactivate
these acoustic signals.
There is also an acoustic signal that sounds when
the programme is completed. By default this
acoustic signal is deactivated but it is possible to
activate it.
How to activate the acoustic signal for the
end of the programme
Make sure the appliance is in user mode.
1. Press the programme button three times.
The indicator
starts to flash.
continues to flash
continues to flash
shows
2. Wait until the indicator
and the remaining programme indicators are
off.
The indicator
shows the current setting:
•
is off = The acoustic signal is off.
•
is on = The acoustic signal is on.
3. Press the programme button to change the
setting.
4. Press the on/off button to confirm the setting.
AIRDRY
AirDry improves the drying results with less energy
consumption. During the drying phase, the door
opens automatically and remains ajar.
CAUTION! Do not try to close the
appliance door within 2 minutes after
automatic opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
The duration of the drying phase and the door
opening time vary depending on the selected
programme and options.
CAUTION! If children have access to
the appliance, it is advised to
deactivate AirDry as opening the door
may pose a danger.
How to deactivate the AirDry
Make sure the appliance is in user mode.
1. Press the programme button four times.
The indicator
starts to flash.
2. Wait until the indicator
and the remaining programme indicators are
off.
The indicator
shows the current setting:
continues to flash
(if applicable).
continues to flash
9