Zanussi 62 D4A 01 AA Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Placa Zanussi 62 D4A 01 AA. Zanussi 62 D4A 01 AA 17 páginas.
Imprimir página
Problem
The hob deactivates.
Residual heat indicator does
not come on.
Automatic Heat Up does not
operate.
The heat setting changes be-
tween two levels.
The sensor fields become hot.
comes on.
comes on.
and a number come on.
You can hear a constant beep
noise.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
12
Possible cause
You put something on the sen-
sor field
.
The zone is not hot because it
operated only for a short time
or the sensor is damaged.
The zone is hot.
The highest heat setting is set.
Power management operates.
The cookware is too large or
you put it too near to the con-
trols.
Child Safety Device or Lock
operates.
There is no cookware on the
zone.
The cookware is unsuitable.
The diameter of the bottom of
the cookware is too small for
the zone.
There is an error in the hob.
The electrical connection is in-
correct.
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
Remedy
Remove the object from the
sensor field.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
Let the zone become suffi-
ciently cool.
The highest heat setting has
the same power as the func-
tion.
Refer to "Daily use".
Put large cookware on the rear
zones if possible.
Refer to "Daily use".
Put cookware on the zone.
Use suitable cookware. Refer
to "Hints and tips".
Use cookware with correct di-
mensions. Refer to "Technical
data".
Deactivate the hob and acti-
vate it again after 30 seconds.
If
comes on again, discon-
nect the hob from the electrical
supply. After 30 seconds, con-
nect the hob again. If the prob-
lem continues, speak to an Au-
thorised Service Centre.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the in-
stallation.