Zanussi MC 20 MG Instrucciones de uso y cuidado - Página 11

Navegue en línea o descargue pdf Instrucciones de uso y cuidado para Cocinas Zanussi MC 20 MG. Zanussi MC 20 MG 23 páginas. Mixed fuel cookers
También para Zanussi MC 20 MG: Manual de instrucciones (23 páginas), Manual de instrucciones (23 páginas)

Digital clock/analogue
programmer
(Fig. 4)
This programmer enables you to switch
the oven on and off at pre-set times
without the need for you to be in
attendance. Most foods cook well
automatically, but preference should be
given to those which will not be affected
by the waiting period before the oven
comes on. The programmer also
incorporates a time of day clock.
Important
For the oven to function, dial 5 should
show the same time as the time on the
clock.
To set the clock
By turning knob 1 clockwise you can set
the correct time of day. It will be
necessary to do this on installation of the
appliance, after a power failure or when
the clock is fast or slow.
Remember to re-set dial to read the same
time as the clock, to do this depress and
turn knob 3.
Manual operation of oven
First ensure that the hand symbol \IllJ is
displayed on dial 4, if it is not, turn knob
2 clockwise until the hand is centred on
dial 4.
Secondly, make sure that the time shown
on dial 5 coincides with that of the clock.
If it does not, correct it by depressing
and turning knob 3 clockwise or
anticlockwise.
Place the food to be cooked into the oven
and set the oven and thermostat control
knobs to the required settings.
Semi automatic cooking
Manual cooking start - Automatic
cooking stop
You may wish to put something in the
oven before going out and programme
the oven to stop cooking before your
return.
Place the food to be cooked into the oven.
Turn knob 2 clockwise to set the required
duration of cooking time on dial 4
(maximum of 210 minutes).
Turn the oven and thermostat control
knobs to the required setting. When the
pre-set cooking time has elapsed, the «0»
symbol will be centred on dial 4, the oven
11
Fig. 4