Alemite 586-A Instrucciones de uso y mantenimiento - Página 6
Navegue en línea o descargue pdf Instrucciones de uso y mantenimiento para Herramientas Alemite 586-A. Alemite 586-A 16 páginas. Cordless grease gun (battery charger included)
También para Alemite 586-A: Instrucciones de uso y mantenimiento (12 páginas)
Imprimir página
4 Power tool use and care
4.1 Do not force the power tool. Use
correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
4.2 Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
4.3 Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
4.4 Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with power tool
or these instructions to operate the
power tool. Power tools are
dangerous in the hands of untrained
users.
4.5 Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
4.6 Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
4.7 Use the power tool, accessories and
tool bits etc. in accordance with
these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
4.8 Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations.*
*
Indicates change.
5 Battery tool use and care
5.1 Recharge only with the battery
charger specified by the
manufacturer. A charger that is
suitable for one type of battery pack
may create a risk of fire when used
with another battery pack.
5.2 Use power tools only with
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire.
5.3 When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connection
from one terminal to another.
Shorting battery terminals together
may cause burns or fire.
5.4 Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
5.5 Do not use a battery pack or tool
that is damaged or modified.
Damaged or modified batteries may
exhibit unpredictable behaviour resulting
in fire, explosion or risk of injury.*
5.6 Do not expose a battery pack or
tool to fire or excessive
temperature. Exposure to fire or
temperature above 130 °C may cause
explosion. NOTE The temperature
"130 °C" may be replaced by the
temperature "265 °F".*
5.7 Follow all charging instructions and
do not charge the battery pack or
tool outside the temperature range
specified in the instructions.
Charging improperly or at
temperatures outside the specified
range may damage the battery and
increase the risk of fire.*
6 Service
6.1 Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
6.2 Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorized service
providers.*
6
Specific safety*
Always wear eye protection. The cordless
grease gun can generate up to 10 000 psi
(689 bar). Rupture of components can inject
grease into skin and eyes, causing serious
injury and possible amputation. If injured,
seek immediate medical attention.
Use only Alemite 340067 grease whip
hose. Use only Alemite grease coupler
308730. Grease injection injuries are a very
serious injury. Hold hose only in area of
spring guard. Inspect hose before each use.
Do not use if hose is damaged or worn. Avoid
accidental starting. Be sure switch is not
depressed when inserting battery pack.
Replace the hose at the first sign of wear,
kink or damage to the outside jacket.
Do not bend hose so that it
becomes kinked.
Do not overreach. Keep proper footing
and balance at all times. Proper footing and
balance enable better control of the tool in
unexpected situations.
Use safety equipment. Always wear
eye protection. Do not operate without
proper safety protection, gloves, and
goggles. Use ear protection to reduce risk of
induced hearing loss.
Dust mask, non-skid safety shoes, hard
hat or hearing protection must be used for
appropriate conditions.
The gun uses lubricants, that may be
flammable and poisonous if ingested.
Do not use gun near open flame or other
fire hazards. Read all warnings on lubricants
before using this gun.
Greases are often marketed as high
temperature because it must maintain their
lubricating properties in hot areas, but the
lubricants may be flammable if the
temperature is too high. Please read all
warnings on lubricants before using this
gun. Do not use flammable greases with this
grease gun.
Disconnect battery from gun before
changing accessories, storing gun or
unscrewing grease cylinder from the gun.
WARNING
Grease gun can develop high pressure
up to 10 000 psi (689 bar). Use safety
glasses and gloves for protection during
operation. Keep hands clear of exposed
rubber portion of hose.
Failure to comply may result in death
or serious injury.