Alemite 8550-C5 Manual de servicio - Página 3
Navegue en línea o descargue pdf Manual de servicio para Equipamiento industrial Alemite 8550-C5. Alemite 8550-C5 4 páginas. High-pressure pump for centralized lubrication
Imprimir páginaHigh-Pressure Pump For Centralized Lubrication
Item
Part No.
No.
Pump Assembly, High-Pressure
1
339359-B1
2
328030
Coupler, Air, 1/4 " NPTF (f)
3
328034
Connector, Air, 1/4 " NPTF (m)
4
43748
Body, Angle, 1/4 " NPTF (m) x 1/4 " NPTF (f)
5
315669
Adapter, 3/8 '' NPTF (m) x 3/8 '' NPTF (f)
6
Tube. 3/8 '' OD
7
Nut, Compression, 3/8 '' Tube
8
Sleeve (Brass), 3/8 '' Tube
9
Connector, Compression, 1/4 '' PT (m) x 3/8 '' Tube
10
338371
Cover Assembly
11
Washer, 1/4 ''
12
Washer, Lock, 1/4 ''
13
Screw, Cap, 1/4 '' -20 x 1/2''
14
48018
Screw, Thumb, 1/4 '' -28 x 1-1/8 ''
Legend:
Part numbers left blank (or in italics) are not available separately
Assembly
NOTE: Refer to Figure 2 for component identi-
fication on all assembly procedures.
CAUTION
Select a clean environment for all assembly proce-
dures. Prevent contamination from foreign mate-
rial. Damage to components can occur.
IMPORTANT: Make sure to remove the pro-
tective cover from the inlet of Pump Assem-
bly (1).
1. Remove the ''knock-out'' from Cover (10) that allows
access for lubricant return Tube (6).
IMPORTANT: Do not apply thread sealant
to the first two (2) threads of any connection.
Contamination can occur.
2. Screw the compression connector assembly [with
thread sealant] into the pump's follower tube.
• Tighten the Connector securely.
• Make sure to orient the connector's tube in the
required direction while tightening.
Alemite Corporation
Description
3. Install Pump Assembly (1) into Cover (10).
4. Secure the Pump Assembly to the Cover with
5. Install the Follower Tube onto the Pump.
6. Tighten the setscrew that secures the follower tube to
7. Guide the pump's follower tube into the optional
8. Secure the Cover to the container with Thumb Screws
9. Test/Prime the Pump assembly.
3
Notes
Qty
1
See SER 339359-A1
1
1
1
1
1
1
1
1
1
Includes items 11-14
3
3
3
3
Washers (11), Lock Washers (12), and Cap Screws
(13).
• Tighten the Capscrews securely.
• Make sure to align the Tube with the hole in the
Cover.
the pump's adapter.
follower plate and fit the Cover onto the container.
(14).
• Refer to Service Guide SER 339359-A1 for details.
Changes Since Last Printing
New Format
SER 8550-C5
Numeric Order
Part #
(Item #)
(11)
17804
43748
(4)
48018
(14)
(13)
77786
(12)
172207-1
315669
(5)
328030
(2)
328034
(3)
(7)
328301-6
(8)
328302-6
(9)
328306-64
338371
(10)
339359-B1
(1)
(6)
382721
Revision (4-00)