Lenovo ThinkServer Manual del usuario - Página 17

Chapter 6. ThinkServer Remote Management Module Web

Console Options

This section describes every page of Web console and each page is divided into several parts corresponding

separately to the several tabs at the left side of the pane. In each part, there are detail illustrations and

introductions of each menu option in the left of the pane.

Notes:

• The first menu item of each tab is default page which will automatically appear when selecting the

corresponding tab.

• Click the HELP button on the right horizontal toolbar, and the Web console will show the relevant

information of each page.

By default, the home page of ThinkServer Remote Management Module shows the Properties page

including general information of the server.

This page provides the following server information:

Information

Product Name

Product Information

Firmware Version

Building Time

ASIC Type

The Configuration page is used to configure Network Setting, Users Setting, Update, etc.

The Network Settings page is used to configure the Network Settings. It includes the following options:

• Automatic (Obtain an IP address automatically): Automatically obtain the IP address (use DHCP).

• Manual (Use the following IP addresses): Manually configure IP address.

You can configure the Network settings by click ncsi0 item.

Option

MAC Address

IPv4 Settings

IPv6 Settings

VLAN Settings

Description

Customizable product name.

Customizable product description.

Firmware version information.

Date and Time of building BMC Firmware.

The server's platform.

Task Description

The MAC address of the devices (Read Only)

If you want to configure the IP by IPv4 protocol, enable

the IPv4, and set the IP address.

If you want to configure the IP by IPv6 protocol, enable

the IPv6, and set the IP address.

When you enable virtual LAN, you have to set the VLAN

ID, Priority also.