ARO 66605 series Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Bomba de agua ARO 66605 series. ARO 66605 series 8 páginas. 1/2 inch diaphragm pump 1:1 ratio (non-metallic)

Imprimir página

OPERATOR'S MANUAL

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Refer to Model Chart to match the pump material options.

637140 XX for Fluid Section Repair (see page 4).

637141 for Air Section Repair (see page 6).

PUMP DATA

Models

. . .

See Model Description Chart for XXX".

Pump Type Non Metallic Air Operated Double Diaphragm

Material

. . .

See Model Description Chart.

Weight

. . . .

Polypropylene

. . . . . . . . . .

Groundable Acetal

KynarR

. . . . . . . . . . . . . .

Maximum Air Inlet Pressure

Maximum Outlet Pressure

. . . . . . . . . . .

Air Consumption

. . . . . . . . . . . . . . . . . .

Maximum Flow Rate

(Ball)

(Duckbill)

Maximum Particle Size (Ball)

(Duckbill)

Maximum Temperature Limits:

Polypropylene

. . . . . . . .

Groundable Acetal

. . . .

Kynar

. . . . . . . . . . . . . .

Groundable

. . . . . . . . . . .

666056 X and 66605H X models only

Dimensional Data

. . . . . . . . . . . . . . . . .

Noise Level @ 70 psi, 60 C.P.M.

* The pump sound pressure levels published here have been updated to an Equivalent

Continuous Sound Level (L

) to meet the intent of ANSI S1.13 1971, CAGI PNEUROP

Aeq

S5.1 using four microphone locations.

NOTICE: All possible options are shown in the chart however certain com

binations may not be recommended, consult a representative or the facto

ry if you have questions concerning availability.

GENERAL DESCRIPTION

The ARO Diaphragm Pump offers high volume delivery even at low air

pressure and a broad range of material compatibility options available.

Refer to the model and option chart. ARO pumps feature stall resistant

design, modular air motor / fluid sections.

Air operated double diaphragm pumps utilize a pressure differential in

the air chambers to alternately create suction and positive fluid pressure in

the fluid chambers, ball checks insure a positive flow of fluid.

Pump cycling will begin as air pressure is applied and it will continue to

pump and keep up with the demand. It will build and maintain line pres

sure and will stop cycling once maximum line pressure is reached (dis

pensing device closed) and will resume pumping as needed.

Models 666056 X and 66605H X: The Acetal material used in these

pumps contains Stainless Steel fibers. It's conductivity allows it to be

connected to a suitable ground. A ground screw and ground wire kit is

provided for this.

INGERSOLL-RAND COMPANY

P.O. BOX 151

ONE ARO CENTER

(419) 636-4242

FAX (419) 633-1674

1/2" DIAPHRAGM PUMP

1:1 RATIO (NON-METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

7.2 (3.3 kgs)

. . . . . . .

8.8 (4.0 kgs)

9.5 (4.3 kgs)

. . . . . . . . .

100 p.s.i.g. (6.9 bar)

1 c.f.m. / gallon (approx.)

. . . . . . . . .

13 g.p.m. (49.2 l.p.m.)

. . . . .

10 g.p.m. (37.9 l.p.m.)

. . . . . . . .

3/32" dia. (2.4 mm)

. . . . .

Fibers

35_ to 150_F (2_ to 66_C)

10_ to 180_F ( 12_ to 82_C)

10_ to 200_F ( 12_ to 93_C)

see page 8

. . . . . . .

71.1 db(A)

BRYAN, OHIO 43506 0151

2001 D PRINTED IN U.S.A.

66605X XXX

1/2'' DIAPHRAGM PUMP

MODEL DESCRIPTION CHART

FLUID CAPS & MANIFOLD MATERIAL

3-PIECE MANIFOLD

SINGLE PIECE MANIFOLD

3 - Polypropylene

J - Polypropylene

6 - Groundable Acetal

H - Groundable Acetal

7 - Pure Kynar

K - Pure Kynar

SEAT MATERIAL

0 - (Duck Bill)

4 - PVDF - Kynar

2 - Stainless Steel

6 - Acetal

3 - Polypropylene

BALL MATERIAL

*(DUCKBILL MODELS)

1 - Neoprene

8 - Polyurethane

2 - Nitrile

A - Stainless Steel

3 - Vitonr

C - Neoprene (*)

4 - T.F.E. (Teflonr)

D - Nitrile (*)

5 - E.P.R.

E - Santoprene

DIAPHRAGM MATERIAL

1 - Neoprene

5 - E.P.R.

2 - Nitrile

8 - Polyurethane

3 - Viton

B - Santoprene

4 - T.F.E. (Teflon) / Santoprene

FLUID SECTION SERVICE KIT SELECTION

EXAMPLE: MODEL # 666053 321

FLUID SECTION SERVICE KIT # 637140 21

66605X-X

RELEASED:

4-15-87

REVISED:

1-18-01

(REV. AJ)

66605 X X X X

66605X X X X

637140 X X

BALL

DIAPHRAGM