ARO PP10A-XXX-XXX-A Series Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Bomba de agua ARO PP10A-XXX-XXX-A Series. ARO PP10A-XXX-XXX-A Series 12 páginas. 1" dry powder diaphragm pump

Imprimir página
OPERATOR'S MANUAL
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE
1" DRY POWDER DIAPHRAGM PUMP
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump mate-
rial options.
7102 Valve Kit for repair of H254PS control valve.
104302 for repair of P39124-100 Filter / Regulator.
637401-XXX for Fluid Section repair with seats (see page 6).
637401-XX for Fluid Section repair without seats (see page 6).
NOTE: This kit also contains several air motor seals which will
need to be replaced.
118597-2 Spool Kit for repair of A212PD 4-way alpha valve.
637397 for Air Section repair (see page 8).
637395-8 Major Air Valve assembly (see page 9).
PUMP DATA
Models . . . . . . . . . . . . . see Model Description Chart for "-XXX"
Pump Type . . . . . . . . . Metallic, Dry Powder, Diaphragm Pump
Material . . . . . . . . . . . . see Model Description Chart
Specific Application for pumping powders up to 50 lb. / ft
Weight . . . PP10X-XAX-XXX-AXXX . . . . 28.65 lbs (12.97 kgs)
PP10X-XSX-XXX-AXXX . . . . 46.2 lbs (20.9 kgs)
Maximum Air Inlet Pressure . . . . . . . . 50 psig (3.4 bar)
Maximum Fluidizing Pressure . . . . . . 100 psig (6.9 bar)
Maximum Particle Size . . . . . . . . . . . . . 1/8" dia. (3.3 mm)
Maximum Temperature Limits (diaphragm / ball / seat
materials)
®
Santoprene
. . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
Dimensional Data . . . . . . . . . . . . . . . . . . . see page 11
Mounting Dimension . 4" x 6.25" (101.6 mm x 158.8 mm)
Noise Level @ 70 psig, 60 cpm
 Tested with 94085 muffler assembly installed.
 The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (LA
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended. Consult a representative or
the factory if you have questions concerning availability.
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX (800) 892-6276
arozone.com
RELEASED 20/Feb/2019 12:56:22 GMT
1:1 RATIO (METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
. . . . . . 80.6 dB(A)
) to meet the intent of ANSI
eq
© 2019
PP10A-XXX-XXX-A
PP10A-XXX-XXX-A Powder Pump
3
MODEL DESCRIPTION CHART
Fluid Connection
A - 1 - 11-1/2 NPTF - 1
B - 1 - 11 BSP
Fluid Cap and Manifold Material
A - Aluminum
S - Stainless Steel
Hardware Material
P - Plated Steel
S - Stainless Steel
Seat Material
A - Santoprene
S - Stainless Steel
Ball Material
A - Santoprene
Diaphragm Material
A - Santoprene
M - Medical Grade Santoprene
Fluid Section Service Kit Selection
EXAMPLE: Model #PP10A-AAS-AAA
Fluid Section Service Kit # 637401-AA
RELEASED:
5-25-18
REVISED:
2-15-19
(REV: C)
Figure 1
PP10A - X X X - X X X
PP10A - XXX - X X X
637401 - X X
Ball
Diaphragm