ARO SCD501BN08-V Series Manual del usuario
Navegue en línea o descargue pdf Manual del usuario para Bomba de agua ARO SCD501BN08-V Series. ARO SCD501BN08-V Series 8 páginas. Automatic dewatering system
Imprimir página
OPERATOR'S MANUAL
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Use only genuine ARO® replacement parts to assure compat-
ible pressure rating and longest service life.
SS-BQG550 for universal bracket replacement.
PNCV-1/2 for pneumatic controlled valve replacement.
637523 for Tubing kit replacement.
MODEL DESCRIPTION CHART
ARO StandardSolution
Application
D - Dewatering
Fluid
5 - Water
Type
01 - Pneumatic liquid
level control
PLC Control Option
B - No PLC
Metering Option
N - No metering
Industry
08 - Mining
Liquid Level
Sensor Version
V1 - Standard
V2 - Low level anti-
block
Installation Style
D – w/bracket for 2"
and 3" PRO and EXP
pumps
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX (800) 892-6276
arozone.com
AUTOMATIC DEWATERING SYSTEM
OPERATING OR SERVICING THIS EQUIPMENT.
SC D 5 01 B N 08 - VX X
© 2015
CCN 47533490001
SCD501BN08-VXX
COMPONENTS INCLUDED WITH KIT
LLS-SC-VX
Liquid Level Sensor (LLS), Version 1 or 2
SS-BQG550
Universal Mounting Bracket
637523
Tubing Kit (includes 20m of 6mm tubing and two filters)
PNCV-1/2
Pneumatic Controlled Valve (PCV) Module Assembly
97999-7154
Operator's Manual
GENERAL DESCRIPTION
The ARO® Automatic Dewatering System (ADS) offers
automatic on/off controls of air operated diaphragm pumps.
The ADS has a Liquid Level Sensor (LLS) which produces a
pneumatic output signal as the fluid level in an unpressurized
vessel rises past a predetermined level and stops the signal as
the fluid level falls past a lower predetermined level.
This pneumatic signal actuates the Pneumatic Controlled Valve
(PCV) in order to open the air line and start the diaphragm
pump. The liquid level range can be set by changing the loca-
tion of the tail ends of the "High Level" and "Low Level" sensing
tubes.
RELEASED: 5-25-15
REVISED
(REV: B)
Figure 1
11-20-15