Aerial AD 550 Manual - Página 10
Navegue en línea o descargue pdf Manual para Deshumidificador Aerial AD 550. Aerial AD 550 16 páginas.
Imprimir página
6.6 Pump-out-kit (optional extra)
Optionally for AD 550 / 650 / 580 / 680 a pump-out-kit is deliverable. You can buy
the "pump-out-kit" from your AERIAL-dealer as an optional extra.
The pump out kit can be installed with few handles completely simply and removed
again when desired.
(a) hose connector
for hose 12 x 2 mm
(b) Cable keeping
(c) Feed through for
main cable
Remove the water collecting bucket.
•
In the bucket space you find an AMP-plug socket, in that a blind plug is fixed.
•
(see 1.1). Pull the blind-plug from it´s socket.
Keep this Plug! It is necessary for the using of the dryer without included
•
pump-out-kit.
Connect the AMP-plug of the pump-out-kit with the AMP-socket in the dryer.
•
Guide the main cable of the dryer out from the bucket space.
•
Fold the hinged feeds (f) of the pump-out kit up!
•
Push the pump-out-kit into the bucket space of the dryer. Make
•
Guide the main cable through the feed through. (c).
•
The pump-out-kit can be placed without energy expenditure in such a way into
•
the bucket space that the back panel locks concisely with the housing of the
dryer. !!! Use no force or power!!!!
Turn the screws for fixing clamps ( e) in clockwise direction, until the pump-out-
•
kit is fixed in the bucket space.
!!! Do not use force or power!!! The screws must be movable completely
simply. Otherwise the pump-out-kit is not placed correctly!!!
Connect a condensate hose at the hose connector (a) and guide it away from
•
the unit into a sump or to outside. The dryer is now ready to use with included
pump. The pump is able to pump up to 4 mtrs.
At the rear panel of the pump-out-kit is placed a red switch (d). With this the
•
pump can be emptied manually, for example before transportation of the dryer.
We recommend to pump out the pump-out-kit before every moving of the dryer,
as otherwise water can flow beside the dryer.
In order to remove the pump-out-kit, proceed in reverse order. Do not forget to
•
put the AMP-blind-plug into the AMP socket again. Otherwise the dryer will not
start.
page 10 of 15
(d) switch for manual pump
out (before moving the unit)
(e) Screws for fixing clamps
(f) hinged feeds
(Has to be hingly folded
up while put into the
dryer!!!)