Aerial AD 750 Series Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Deshumidificador Aerial AD 750 Series. Aerial AD 750 Series 15 páginas.
Imprimir página
Pos. 0 = Unit is switched off
Pos. 1 = Continues operation
80%
= The dehumidifier switches off when
a humidity of approx. 80% r.h. has
achieved. And switches on again
when humidity is higher than 80%.
60%
= The dehumidifier switches off when
a humidity of approx. 60% r.h. has
achieved. And switches on again
when humidity is higher than 60%.
40%
= The dehumidifier switches off when
a humidity of approx. 40% r.h. has achieved. And switches on again when
humidity is higher than 40%.
20%
= The dehumidifier switches off when a humidity of approx. 20% r.h. has
achieved. And switches on again when humidity is higher than 20%.
The smooth setting option of the hygrostat makes a very convenient humidity
control possible for you. If very precise values are requested, you should match the
hygrostat with the information on a precise hygrometer.
Please consider:
Humidity values of a minimum of 40 % - 45 % r.h. can be achieved with a
condensation dryer. An adsorption dryer is to be employed if lower values are
required.
For this purpose, ask your technical consultant.
Optimal climate:
For living rooms, environmental conditions of 20°-25°C and 50 - 60 % r.h. are
recommended.
For building drying, the hygrostat becomes turned at continues running (POS. I).
In the case of the drying rooms with wood equipment (e.g. floors) or paintings,
antiques and similar things should not be fallen below a humidity of 55%.
Ask your technical consultant in the case of special applications.
External humidity control
We also deliver AD 7 optionally with connection option for an external On-/off-switch,
e.g. through a dew point control or external hygrostat.
In that case, the device is equipped with our SensorLogic which supplies a floating
contact and a mains voltage of 24 V.
An Amphenol-socket is then in the operating tableau instead of the hygrostat. With
an Amphenol-plug (accessory), your external control can be connected very simply.
Page 8 of 15