Acoustic Arc AAI-DS0820US0 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Altavoces Acoustic Arc AAI-DS0820US0. Acoustic Arc AAI-DS0820US0 6 páginas. 2.4g digital stereo wireless speaker system

Imprimir página
3.

REMOTE CONTROL

A.
Remove the battery cover at the rear of the remote control unit and insert 2 pcs " AAA" size batteries
(included) into the battery compartment with the correct polarity.
B.
Place back the cover and close the battery compartment.
E.

OPERATION

1. Connect the power adapter between wall jack and transmitter. The LED will turn to Green.
2. Turn on the audio source (TV or audio component) to which the transmitter is connected with. The LED will
turn from Green to Blue.
3. Press the ID button on speakers and transmitter for best performance in your location.
4. Turn on the Power button on the speaker and adjust the volume by pressing " +" and " -" for desired listening
level. Volume can also be adjusted by pressing " +" and " -" button located on the remote control unit.
Note:
5. If you cannot find the best reception sound on speakers, press the "ID" button for 3sec. on the transmitter
and speakers to get the pairing again. The pairing processes will be finished after hearing a " Do" sound.
SWITCHING OFF
1.
If there is no audio input signal to transmitter in 4 minutes, transmitter will go to standby mode and LED will
change from Blue to Green.
2.
If the power adapter is unplugged, the LED on transmitter will turn off.
3.
Speaker will turn to standby mode if there is no input signal to transmitter and LED will become Green.
Speaker will automatically shut off when standby mode continues for 5 minutes.
4.
Speaker will also turn to standby model if you press the POWER button on the remote control to Green
LED. Speaker will automatically shut off after 5 minutes.
5.
At standby mode, speaker will turn to On automatically after getting signal from transmitter.
OTHER CONTROL
1. Select volume up and down on Speakers or Remote Control Unit.
2. If you hear interference from other components, press the " Pair" button on transmitter and speakers for best
reception channel matching.