ARRANMORE AR-2339 Manual de uso y mantenimiento - Página 12
Navegue en línea o descargue pdf Manual de uso y mantenimiento para Ventilador ARRANMORE AR-2339. ARRANMORE AR-2339 14 páginas.
Imprimir página
OPERATION AND INSTALLATION INSTRUCTIONS
YOU MUST SET CEILING FAN MANUAL SWITCH TO HIGH SPEED AND LIGHT
KIT (IF ANY) TO ON POSITION BEFORE OPERATING REMOTE CONTROL.
IMPORTANT POINTS TO REMEMBER:
1.
Please read and save these instructions.
2.
Please note that all fixed wiring appliances should be installed by a qualified electrician.
3.
The supply to the remote control receiver should be connected through a mains switch, i.e.
existing wall switch.
4.
Disconnect from power supply at wall switch before working on remote control receiver or
ceiling fan.
5.
Install receiver into the ceiling fan canopy of the fan to ensure proper protection.
6.
This unit is to be used for the control of ceiling fan and in an AC110/120V 60Hz power supply
only.
7.
Do not install in wet locations or immerse in water.
8.
Do not pull on or cut leads shorter.
9.
Do not drop or bump the unit.
10. PLEASE NOTE: The battery will weaken with age and should be replaced before leaking takes
place as this will damage the transmitter. Dispose of used battery properly, keep the battery out of
reach of children.
11. CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any
variable (rheostat) wall control.
INSTALLATION INSTRUCTIONS
CAUTION: INCORRECT WIRE CONNECTION WOULD DAMAGE THIS RECEIVER.
1.
Ceiling fan must be set at HIGH speed and light kit (If any) at ON position by pressing the "Light
Switch" after installation.
2.
Once the connection has been made, the receiver inserts into the drop rod hanging bracket.
The canopy comes up to cover the receiver and bracket.
CEILING FAN REMOTE CONTROLLER
(Please keep this instruction pamphlet.)
IMPORTANT
12