Array Solutions Bandmaster III Manual - Página 5
Navegue en línea o descargue pdf Manual para Media Converter Array Solutions Bandmaster III. Array Solutions Bandmaster III 15 páginas. Universal band decoder
Imprimir página2 Bandmaster III Hardware Configuration
In this section we will look at the different ways of configuring the Bandmaster III hardware.
The unit may (should) be configured via the Bandmaster III software (preferred method) or by
DIP switch settings on the Bandmaster III circuit board.
Note: When using the decoder with the optional 4-Wire Network control system you *must*
use the software configuration option.
Band Data:
Yaesu / Elecraft Band Data users will configure the Bandmaster III for "Band Data"
as the Radio Model as shown in the following image (i.e.; Band Data should be chosen instead of
the radio model):
The interface type is automatically determined from the radio type. Switch settings are dependent
on which configuration mode you select, manual or software. A '0' in the tables indicate OFF and
'1' indicates ON. Switch settings are:
Revision 1.5 November 21, 2011
P a g e
| 5