artisan WM217 Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Máquina de coser artisan WM217. artisan WM217 12 páginas. Medium-weight materials utility-decorative

Imprimir página

Puller attachment

Lifting lever for roller and presser foot

32 (Fig. 1)

Position A:

Roller and presser foot are lowered,

are lying on the fabric and feeding it.

Both are lifted with the knee lever .

Position B:

The roller is raised . only the presser

foot is lifted with the knee lever.

Adjusting the stitch length:

First set the desired stitch length with

screw 33, then set the stitch length on

the machine slightly smaller.

Check:

Adapt the stitch length on the machine

so that the fabric is slightly stretched,

between roller and presser foot.

Roller pressure regulating screw 35

(Fig. 2)

Roller pull:

If for special work you wish the roller

to pull slightly to the left or right ,this

can be done as follows : Place lever 32

on A (roller lies on fabric). Turn screw

36 slightly and turn roller a little.

Removing the roller:

Loosen screw 33 and pull out to the

back, place lever 32 on B, loosen

screw 37 with 2.5mm hex wrench and

remove roller support downwards. The

machine can not be used without the

puller.