Artison RCC600-CM Manual de instalación - Página 6
Navegue en línea o descargue pdf Manual de instalación para Subwoofer Artison RCC600-CM. Artison RCC600-CM 19 páginas. Subwoofer module | freestanding subwoofer | subwoofer amplifier | cabinet mount
Imprimir páginaRCC 600 FREESTANDING SUBWOOFER (RCC600-FS)
SUBWOOFER PLACEMENT AND ORIENTATION
The RCC 600 Freestanding Subwoofer comes with four rubber feet to attach to the side of your
choice.
Carefully decide what placement and orientation are best for the subwoofer, the
supplied rubber feet are not removable once applied.
The classical rule for subwoofer
placement is that the subwoofer should be placed near the same wall the front channels are
located, at one-third of the total distance of the wall. When using multiple subwoofers, consult
with your dealer or custom installer for best placement options. This subwoofer is not affected by
cabinet orientation and can be used either vertically or horizontally.
The normal vertical
orientation is with the terminal cup facing down. The rubber feet will allow clearance for the
speaker wire to fit underneath. If the subwoofer is placed horizontally, the rubber feet should be
applied to the corresponding bottom side of the cabinet.
SUBWOOFER SETUP
The RCC 600 Freestanding Subwoofer is to be used in conjunction with the RCC 600 Subwoofer
Amplifier. On the rear of the amplifier in the SETUP section, the EQ switch should be set to the
CLOSED BOX setting.
SUBWOOFER GRILLE INSTALLATION
The grille for the RCC 600 Freestanding Subwoofer is held in place with magnets. Simply position
the grille on the front of the subwoofer into the recessed area.
\
6