3M Digital Projector X35N Garantía del producto y manual de seguridad - Página 16
Navegue en línea o descargue pdf Garantía del producto y manual de seguridad para Proyector 3M Digital Projector X35N. 3M Digital Projector X35N 19 páginas.
También para 3M Digital Projector X35N: Hoja de especificaciones (2 páginas)
Imprimir página
Product Warranty and Safety Guide
Replacing the Internal Clock Battery
This projector has an internal clock that uses a battery. When the clock for the network function
does not work correctly, please replace the battery.
HITACHI MAXELL, part number CR2032 or CR2032H.
1. Turn the projector off, and unplug the power cord. Allow the projector to
cool sufficiently.
2. After making sure that the projector has cooled adequately, pull the slot
cover forward, squeezing slightly on each side and remove it from the
projector.
3. Remove the battery case.
Hold the battery case gutter by finger nail or other thing and pull out the
battery case slowly from the battery slot.
For ceiling mount applications, please remember that the battery will
drop down as soon as the battery case is pulled out.
4. Take the old battery out from the battery case.
5. Replace battery.
Put a new battery into battery case. Please make sure that the + is facing
upward. Insert the battery case slowly into the battery slot until you hear
the snap.
6. Close the slot cover.
Replace the slot cover by reversing the procedure used when removing
the cover.
The internal clock will be initialized by removing the battery. For setting the clock, see Net-
work Guide.
•
Be careful of handling a battery, as a battery can cause explosion, cracking or leakage,
which could result in a fire, an injury, and environment pollution.:
-
Use only the specified battery. Do not use a battery with damage, such as a
scratch, a dent, rust or leakage.
-
When replacing the battery, replace it with a new battery.
-
If the battery leaks, clean the battery holder and wipe out the battery slot with
a clean dry cloth, and then replace the battery. If your skin or clothing comes in
contact with the battery leakage, immediately rinse well with water.
-
Make sure the plus and minus terminals are correctly aligned when loading a battery.
-
Do not work on a battery; for example recharging or soldering.
-
Keep a battery in a dark, cool and dry place. Never expose a battery to a fire or water.
-
Keep a battery away from children and pets. Be careful for them not to swallow a battery.
-
Obey the local laws on disposing a battery.
16
√ Note
WARNING
3M™ Digital Projector X30N/X35N
Slot Cover
Battery Slot
Battery Case
Battery
Battery
Case
Battery (+)
Battery
Battery (-)
© 3M 2009. All rights reserved.
Case