Ash OMNI 3 Manual de inicio rápido - Página 5
Navegue en línea o descargue pdf Manual de inicio rápido para Microscopio Ash OMNI 3. Ash OMNI 3 7 páginas.
Imprimir páginaOMNI
3
Quick Start User Guide Rev 3.1
Maintenance and Care
●
Where possible, the OMNI
debris which could affect performance or degrade the system's mechanical and electronic parts.
If a clean environment is not available, the OMNI
possible. In harsh environments, cover the OMNI
●
External surfaces can be wiped down with a clean, water moistened lint-free cloth (not wet).
Never wipe down with acetone or other harsh solvents that may damage surfaces.
●
Cleaning Optics: Do not touch lens surfaces with your fingertips, as the resulting fingerprints
may destroy optical coatings over time. Only clean optical surfaces with proper cleaning
supplies, and only when necessary. If the lens is covered with loose dust, first try blowing off
this dust using a can of optical grade (oil-free) canned compressed air. Be careful not to shake
the can, or propellant may blow onto the lens. As an alternative, use a lens brush to gently wipe
off the dust. If the lens is soiled with greasy deposits which cannot be blown or brushed off, use
alcohol based commercial lens cleaner and a lens tissue or a lens cloth. Apply the lens cleaner
generously to dissolve grease, and then blot off the lens cleaner and dissolved grease using
minimum motion. Avoid rubbing the lens, since hard particles from deposits or the lens cloth
could scratch the optical coatings. Where lens contamination is unavoidable, consider adding
Lens Protector 58mm (AI 100-062); contact
●
Cleaning Mechanical parts: To ensure a long, trouble-free service life, wipe down the system
regularly to remove any dust or dirt from the stand. Should the focus block seize or require
tightening, please contact your Ash representative.
●
The ringlight can be removed to gain access to the +5 Lens for cleaning by pressing the release
button at the back and pulling the ringlight down away from the OMNI
General Safety
•
Indoor use only
•
Exercise caution when lifting, handling or moving the Omni 3.
•
Exercise caution when installing or removing accessories, ensuring a central and stable body
position, thus preventing any possible strains or injury.
•
Ensure all screws and fixings are properly secured.
•
Disconnect all power sources prior to moving or working on equipment.
•
Do not stare at operating lights as it may be harmful to the eyes.
3
should be kept in a clean environment away from dirt, dust, oil and
3
3
should be kept as clean and protected as is
with plastic when not in use.
for further detail.
head.
3
5 |
P a g e