Asko ADA Series Manual de instrucciones de instalación - Página 7

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Lavavajillas Asko ADA Series. Asko ADA Series 20 páginas.

STEP 1. FITTING THE DISHWASHER IN PLACE

Be sure to remove the transport protection for the

door when unpacking the dishwasher.

Attach the light shielding film (packed in the

document bag) to the underside of the countertop

above the touch buttons. (Only certain models).

The light shielding film ensures optimal button

functionality.

NOTE:

The surface on which the protective film is to be

attached must be clean and dry.

Attach the supplied door sealing

(only certain models).

This strip is an essential part of the Turbo Dry

Express system and must be installed to ensure

an optimum seal between the dishwasher tank

and door.

Start by measuring the height from the floor to the

bottom edge of the counter top. Measure the height

from the floor to the top edge of the dishwasher.

Loosen the lock nuts on the dishwasher's steel

feet using a 5/8 inch (16 mm) open-ended wrench.

Screw the lock nuts down as close to the floor as

possible.

CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM

5/8" (16 mm)