Asko D5434XXL W Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Lavavajillas Asko D5434XXL W. Asko D5434XXL W 20 páginas. User manual 8093969 asko d5454 xl en
También para Asko D5434XXL W: Especificaciones (2 páginas), Especificaciones (2 páginas), Manual de instrucciones (20 páginas)

Imprimir página

BEFORE WASHING FOR THE FIRST

TIME

WATER SUPPLY

The machine can be connected to either a hot (max. 160 °F, 70

°C) or cold water supply. We recommend a cold water supply.

The water pressure should be 4.2-140 psi. See also the section

Economic dishwashing in the chapter Loading the dishwasher.

CHECKING WATER HARDNESS

Contact the local water utility to check the water hardness in your

area. This is important to determine how much detergent and

rinse aid to use.

TOP UP WITH RINSE AID

Drying is faster if you use rinse aid.

1 Open the rinse aid compartment lid.

2 Carefully top up with rinse aid. Only add rinse aid to the level

marked max.

3 Wipe up any spilled rinse aid around the compartment.

4 Close the lid firmly.

SELECTING THE RINSE AID DOSAGE

The rinse aid dispenser can be adjusted between

(High dosage).

Increase the rinse aid dosage:

• If the dishes have water marks.

Reduce the rinse aid dosage:

• If the dishes have a sticky white/blue film.

• If the dishes are streaked.

• Heavy foaming. If you have very soft water, the rinse aid can

be diluted 50:50 with water.

SETTING THE RINSE AID DOSAGE

The section Settings describes how to set the rinse aid dosage.

REFILL RINSE AID INDICATOR

When the rinse aid needs topping up, the above symbol lights on

the display.

NOTE!

After topping up, it may take a while before the symbol goes

out.

LOADING THE DISHWASHER

ECONOMIC DISHWASHING

Run programs only with a full load

Wait until the dishwasher is fully loaded before running a program,

this way you save energy. Use the Rinse & Hold program to rinse

the dishes if there are any unpleasant odors while you wait for the

dishwasher to become fully loaded.

Run programs at a lower temperature

If the dishes are only lightly soiled, you can select a lower

temperature with certain programs. See also the section Selecting

Options in the chapter Using the dishwasher.

Select a program with Short dry

To save energy, use Short dry. The drying result will be better if,

once the program is finished, you leave the door slightly open.

Do not rinse under running water

Simply scrape off large food particles before loading the

dishwasher.

Choose a green detergent

Read the environmental declaration on the packaging!

Connect to cold water...

If you use oil or electricity to heat your home.

Connect to hot water (max. 160 °F (70 °C))...

If you use district heating, solar power, or geothermal power to

heat your home. Choosing a hot water connection cuts program

times and reduces the dishwasher's electricity consumption.

FRAGILE DISHES

Some cookware is not dishwasher safe. This can be for several

(Off) and

reasons. Some materials cannot withstand high temperatures,

others can be damaged by dishwasher detergent.

Fragile decoration

Porcelain with decoration on top of the glazing (the items feel

rough) should not be washed in a dishwasher.

Crystal/Glass

Position items so that they do not touch each other during the

wash. Use the lowest possible wash temperature and the shortest

possible program. Select Short dry. Antique and very fragile items

should not be washed in a dishwasher.

Glass washed in a dishwasher at high temperatures can gradually

develop a gray film that cannot be removed. Wash fragile glasses

at a low temperature and with a small amount of detergent.

Silver

Silver and stainless steel items should not come into contact, as

the silver can become discolored.

Cutlery with glued handles

Some types of glue are not dishwasher safe. In such cases, the

handles may loosen.

Customer Care Center 1-800-898-1879