Ambient Weather WS-09 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Termómetro Ambient Weather WS-09. Ambient Weather WS-09 15 páginas. 8-channel wireless refrigerator/freezer thermometer

Ambient Weather WS-09 Manual del usuario
1. Remove the battery door on the back of the sensor by removing the set screw, as shown in
Figure 1 .
2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the
transmitter. Set the first transmitter to Channel 1 (refrigerator) and the second transmitter to
Channel 2 (freezer).
Figure 2 displays all four switches in the OFF position (factory default setting).
3. Channel Number: The WS-09 supports up to eight transmitters. To set each channel number
(the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table 1.
4. Temperature Units of Measure: To change the transmitter display units of measure (°F
vs. °C), change Dip Switch 4, as referenced in Table 1.
Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Figure 1
Figure 2
Page 3