Ambient Weather WH31-SRS Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Instrumentos de medida Ambient Weather WH31-SRS. Ambient Weather WH31-SRS 9 páginas. Temperature and humidity solar radiation shield
Imprimir página
4 Tools and Materials Needed
•
5/16" Wrench
•
Drill with 1/8" to 9/64" for mount without anchors
•
Drill with 1/4" to 5/16" for mount with anchors
5 Location Tips
•
The radiation shield must be placed away from large radiant heat sources, such as sun exposed
buildings.
•
The radiation shield should be placed in an open area to insure unrestricted air flow or wind.
•
Do not install over or near sprinklers. Continuous moisture may damage the temperature sensor.
6 Installation Options
There are two different mounting configurations for the radiation shield:
•
Pole or metal pipe with outside diameter between 1" and 1 ¼"
•
On the side or top of a wooden post
7 Installation
Step 1. Attach the
mounting arm attachment bracket to the mounting arm.
Horizontal Installation
Figure 1
Version 1.1
©Copyright 2022, Ambient LLC. All Rights Reserved.
Vertical Installation
Figure 2
Page 3