Aktobis WDH-FGA1372 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Aktobis WDH-FGA1372. Aktobis WDH-FGA1372 12 pages.

Functional description of the control panel:

TIMER (remaining time/start time 1-24 hrs.)

Setting the operating strength

Setting the operating mode

On / Off button

Without function on this model

SLEEP = Low-noise night operation

Display / display panel (temperature etc.)

UP button for increasing the room temperature

DOWN button to lower the room temperature

Instructions for use:

1. Commissioning

1.1.

Insert the mains plug properly into the socket.

1.2.

Check that the exhaust hose for the warm exhaust air is properly installed (see page 4-5 of the instructions

for use).

1.3.

Make sure that the horizontally mounted outlet louvres are open towards the desired direction.

1.4.

Press the ON/OFF switch. The air conditioner switches on and the default setting Automatic mode with

medium operating strength starts to work. The default target temperature is 24°C. At the same time, the

operation/signal lights turn on. (Note: The room temperature display panel can display values from 0°C to

50°C. )

1. Signal light when timer is activated

2. Signal light for high operating strength (H)

3. Signal light for medium operating strength (M)

4. Signal light for low operating strength (L)

5. Signal light when automatic mode is activated

6. Signal light when cooling mode is activated

7. signal light when fan operation is activated

8. Signal light for dehumidification mode

9. Signal light when the water tank is full

10. signal light for active compressor operation

11. no function on this model

12. signal light when night mode is activated

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de