AeroClave RDS 3110 Manuel de référence rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} AeroClave RDS 3110. AeroClave RDS 3110 5 pages.
Également pour AeroClave RDS 3110 : Manuel de dépannage (4 pages)
Imprimer la page
NOTE: When operating in Ambulance mode. The screen shown in (Figure 1) will be present on
the screen upon powering up the RDS 3110 system. Upon turning on the red arming switch,
the screen shown in (Figure 2) will appear. To clear the error, as shown in (Figure 3), connect
the ADP connector hose to the RDS 3110 system.
Figure 1
1. Press the start button, the LED lights will begin to blink
2. The RDS 3110 system will fog for 6 minutes
3. After the fog, allow the ambulance to sit uninterrupted for a minimum of 10
minutes.
4. After the 10 minutes, the LED lights will stop blinking, and you can open the
doors to the ambulance.
5. Allow any haze or fog to dissipate before entering the ambulance.
6. If there is any excessive moisture, simply allow to dry or manually wipe away.
RDS 3110 Quick Reference Guide
with
For ambulances
either an ADP-PT or ADP- EX port
Figure 2
Figure 3